Media Playback - J5create JUD530SE Manuel De L'utilisateur

USB3.0 mini ultra station
single system. Please ensure that all other video over USB drivers are
uninstalled before continuing with your j5create installation.
- Check to make sure that the device is plugged in correctly to the host
system.
Make sure that the USB portyou are using is USB3.0.
-
Unplug the USB cable of the USB display device and re-insert it.
-
Check to see that the monitor is connected correctly and is powered
-
ON.
Make sure to restart your computer after the driver installation.
-
Try a different USB port and/or computer.
-
Unplug all other USB devices from the system.
-
Try connecting the USB cable of USB display device directly to the
-
computer instead of through a hub.
Reset/refresh/resynchronize your monitor.
-

Media Playback

During video playback on all platforms, please do not change the
-
display mode, position or arrangement of the video player window
(such as dragging the video player window between the main display
and attached display). This may cause the video player to stop playing.
We suggest stopping the video playback, moving the window to the
attached USB graphics display device and then selecting the video clip
to start playing.
Cursor movement is slower when the mouse hovers on the video region
-
of the Flash player,
Downsizing your screen landscape lower than 50 % will help smooth out
-
jumpy video playback for videos running in Full Screen Mode.
You may experience poor video performance on USB graphics devices
-
with low spec PC systems.
Video rendering using hardware overlays is supported.
-
Some DVD playback software packages do not support playing on a
-
second display adapter of any kind. You may try to open the media
player in the secondary display first before you start playing the DVD.
13
User Manual