Xqisit xqS10 Mode D'emploi Rapide page 5

2) Charging the xq S10
• The xq S10 can always be charged as required. Use the USB cable to connect it to a computer. The
xq S10 can also be charged using a power adapter with a USB port. (not included, serving 500mAh)
Note: Completely charge the xq S10 at least once a month in order to obtain the best performance.
3) Connecting a device to the xq S10 – using Bluetooth
• Select a device with BT 3.0 or higher (mobile phone, MP3 player etc.) and activate the BT
connection.
• Activate the search mode of your BT device (search for new device).
• Hold down the O button until the LED on the front flashes blue/red. The xq S10 has 3 minutes of
search time to establish a connection with a BT device.
• Your BT device will show <<xq S10>>. Select it for the connection. The password for the connection
is "0000" if it is required. Note: The steps for connecting are only necessary the first time.
Automatic connection is possible with most BT devices except Apple® devices.
• Check on your BT device as well whether the connection has been established with „xq S10". The
connection process can also be called up by simply pressing and holding the O button. When the
LED flashes red/blue, release the button for the connection process.
4) Connection using the 3.5-mm socket
• For devices without BT functionality, use a 3.5-mm jack cable to connect your device to the xq S10
(cable not included in delivery contents).
• When using the 3.5 mm socket, the xq S10 can only be controlled using the connected device.
There is no hands-free operation possible here.
5