Automatic Deactivation; Childproof Lock; The 'Fuel' Indicator - Zibro SRE 237 E Mode D'emploi

Masquer les pouces Voir aussi pour SRE 237 E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
I: When the mark
appears, the childproof
lock has been activated.
J: When the SAVE func-
tion is activated, the
heater will automatically
switch on or off in order
to remain within a speci-
fied temperature range.
K: When the FUEL indi-
cator has appeard, the
information display will
show the number of
minutes of fuel left in
the tank.
4
58
e - 8
Defective booster.
e - 9
Air filter dirty; or
Fuel pump dirty.
The heater has been in operation
continuously for a period of 69 hours
and has turned itself off automatically.
-- : --
Out of fuel.
+
-- : --
Too little ventilation.
+
e - 1 1
Too little ventilation.
+
Always contact your dealer for any malfunctioning not listed above and/or when the
error keeps occurring after taking the corrective measure as described above.

AUTOMATIC DEACTIVATION

This heater is fitted with a safety system that ensures that it switches off automatical-
ly after 69 hours continuous operation. The following will then appear in the display:
. If desired, you can switch the heater on again by pressing the
Section D).
AUTOMATIC CLEANING MODE
When the heater has been burning continuously for two hours at its highest setting, the
burner will automatically start an autoclean procedure. The display will show the auto-
cleaning code cl:05 running back to cl:01. The procedure takes 5 minutes, during which
the heater will burn at its lowest setting, while the burner autocleans. When the burner
is clean again, the heater will automatically switch back to the highest setting again.
I

CHILDPROOF LOCK

The childproof lock can be used to prevent children accidentally changing the heater set-
tings. When the heater is burning and the childproof lock is on, the heater can only be
switched off. Other functions are blocked then. If the heater has already been switched
off, the childproof lock also prevents accidental ignition of the heater. Activate the child-
proof lock by pressing the appropriate key N and holding it down for more than 3 seconds.
The KEY-LOCK indicator (
that the childproof lock has been activated. Switch off the childproof lock by pressing the
key N and holding it down for more than 3 seconds once again.
J
THE CORRECT USE OF 'SAVE'
The 'SAVE' function allows you to limit the temperature. When this function is activated,
the heater will automatically switch off, when the room temperature exceeds the set tem-
perature by 3°C. Subsequently, when the room temperature has dropped again to the set
temperature, the heater will automatically switch on again.
Activate the 'SAVE' setting by pressing the appropriate Q key.
information display (Fig. J). Switch off the function by pressing the SAVE key once again.
Without the 'SAVE' setting your heater will maintain the set temperature by approxi-
mation as well, by adjusting its heating capacity. 'SAVE' is an economy setting, which
you can use when, for instance, you are not present in the room or to keep it frost-
free.
K

THE 'FUEL' INDICATOR

When the FUEL indicator appears, it means that there is only fuel left for 10 more min-
utes. The count-down of the remaining heating time can be seen in the information
display L (Fig. K). Now you have two options:
e
you remove the fuel tank and refill it outside the living room (section B) or
e
you push the button EXTENSION S. By pushing this button, the remaining
heating time will extend to 90 minutes. The heater will automatically switch
) will appear on the information display (Fig. I), indicating
Contact your dealer.
Clean filter
Contact your dealer.
Switch the heater back on.
Refill removable tank.
Ventilate better.
Ventilate better.
button M (see
will display on the

Publicité

Table des Matières
loading

Table des Matières