Installing New Software - Loewe DVB-T Mode D'emploi

Installing new software

Loewe is constantly working to develop its
products further, in order to offer you the last word in convenience and as
wide a scope of functionality as possible.
To ensure that your satellite receiver is always up-to-date and state-of-
the-art, new software versions will be provided from time to time which
can be beamed directly to your device via satelliteand can be installed
automatically (available only via ASTRA1).
Automatic software detection
Your device can find out when new software
versions are available. This happens at night, when your EPG is
automatically updated. To enable this update to take place, your TV set
simply needs to remain in standby mode (not with the On/Off button
switched off).
If a new software version has been found, an on-screen message will
inform you accordingly next time you switch the TV on:
You can decide whether you wish to download the new software or not.
Confirm with OK to start the download and install process for the new
software, which will be transmitted by satellite.
You can find out more in the section entitled „Downloading the
software".
Searching for new software
If you always turn your TV set off using the On/Off switch, it will not check
automatically if there is new software available. If this is the case, you can
periodically carry out your own check (manual search). To do this, proceed
as follows:
1. Press the MENU key to call up the TV menu.
2. Confirm the line marked „Settings" with OK.
3. Confirm the line marked "Other" with OK.
4. Select the entry marked „Update digital TV software" and press OK.
Update digital TV software
Current version: V 3.0. 0
You can search for a new software version with OK.
DVB_T_S_GB_F_Esp
MENU
13
5. If you start the search with OK, a check is performed to see if a new
software version is available.
6. If a new version is available, an on-screen message will appear.
Update digital TV software
Current Version V 3.0.0
New Version: V 3.1. 0
Downloading the software
1. If you now press OK in the dialog box shown above, you can decide
whether you want to download the software straight away, when you
switch the TV off, or not at all.
We recommend that you always update your digital software. This is
the only way to ensure that your device is always up to date.
2. If you have chosen to download the software, the software on your
device will be configured and you will be informed of the download's
progress by a grey bar and a counter.
Do not switch your device off during the download! The
download process can last up to an hour. Once finished, a
message will appear informing you that the download process
is complete.
3. Once you have updated the software, you will be prompted to turn off
your TV set with the On/Off switch and turn it back on again.
If you did not download the update, you will be asked again when you
switch the TV on whether you wish to continue with the update process.
END
18.11.2004, 13:51 Uhr
END
13