Rochet 2035 & VD78 Manuel D'utilisation page 26

CHRono – Ym04
1. usInG THe sTOPWaTCH
The stopwatch can measure up to 59'59"80
in 1/5 second increments. When the mea-
surement reaches 12 hours, the stopwatch
automatically stops counting.
• 1/5-second hand is capable of timing 12
hours. (60 seconds x 720 times)
• Minute hand is capable of timing 12 hours.
(60 minutes x 12 times)
Before using the stopwatch, be sure to check
that the crown is set at the normal position
and that the Stopwatch hands are reset to
the "0" position.
Note: If the Stopwatch hands do not return to the "0"
position when the stopwatch is reset to "0", follow the
procedure in "Stopwatch Hand Position Adjustment".
measurInG TIme WITH THe sTOPWaTCH
• Pull crown out to the 2nd click position.
• Press button "A" for 2 seconds.
Stopwatch minute hand turns a full round and
can now be set to correct position.
Press button "B" repeatedly to set it to "0"
position.
Note: Stopwatch minute hand moves quickly if button
"B" is kept pressed.
• Press button "A" for 2 seconds.
> Stopwatch 1/5-second hand turns a full
round and can now be set to correct position.
Press button "B" repeatedly to set it to "0"
position.
Note: Stopwatch 1/5-second hand moves quickly if
button "B" is kept pressed.
• Push crown back to normal position.