Guarantee & Service - Philips RQ1090 Mode D'emploi

English
20
5 Insert a screwdriver between the front and
back panel to open the shaver.
6 Remove the side panels.
7 Unscrew the 3 screws on the inside of the
shaver and remove the back cover.
8 Pull the wires out of the motor unit and
remove the battery.
Be careful, the battery strips are sharp.
Do not put the shaver back into the plugged-in
Power Pod after you have removed the battery.
guarantee & service
If you need information or if you have a problem,
please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre
in your country (you find its phone number in
the worldwide guarantee leaflet). If there is no
Customer Care Centre in your country, go to
your local Philips dealer or contact the Service