Before First Use - Hamilton Beach 35033 Mode D'emploi

Masquer les pouces Voir aussi pour 35033:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Frying
BEFORE FIRST USE: Thoroughly clean and dry fryer. See "Cleaning Your Fryer" section.
NOTE: Never operate unit without oil in tank or unit will exceed temperature limit and will require resetting. See "How to Reset" section for details.
1
Place assembled fryer on a stable,
level, heat-resistant surface out of
reach of children. Lift lid to open.
840225202 ENv01.indd 7
840225202 ENv01.indd 7
w WARNING
Burn Hazard.
• Never fill oil above MAX fill mark.
• Never move fryer when it is in operation or when
fryer contains hot oil.
• Never leave fryer unattended while in use.
• Remove as much moisture from food as
possible. Do not add water or ice to oil.
2
Remove basket from fryer.
• Escaping steam may cause burns to hands or
fingers. Open lid carefully.
• Failure to follow these instructions may result in
serious burns since hot oil may spill from fryer.
3
Fill fryer with at least 10 but no
more than 12 cups of oil to top
indicator mark on removable
oil pot.
NOTICE: Never operate unit
without oil in pot or unit will
exceed temperature limit and will
require resetting. (See "How to
Reset" on page 12.)
4
Make sure fryer is turned to MIN.
Attach magnetic end of cord
assembly to fryer socket. Magnetic
end of cord will only go in one
way. Be careful not to disturb
magnetic connection when
plugging cord into electrical outlet.
NOTE: The low magnetic force
allows the cord to "break away"
which prevents unit from
accidentally being pulled off
a countertop.
6/27/14 7:41 PM
6/27/14 7:41 PM
7

Publicité

Table des Matières
loading

Table des Matières