Samsung MX-T70 Manuel page 9

You can give an echo effect to the sound from a connected microphone (MIC1) by
adjusting the ECHO1 knob.

ECHO1
If you turn clockwise, the echo effect goes up, and if you turn counter-clockwise, the echo
effect goes down.
Use the VOL1 knob to adjust the volume of a connected microphone (MIC1).

VOL1 If you turn clockwise, the volume goes up, and if you turn counter-clockwise, the volume
goes down.

MIC1 Connect your microphone to the MIC1 jack.
Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to
Audio Out on an external analogue output device.
AUX2/
GROUP

PLAY IN
Terminals
Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main
GROUP unit to Audio In on an external analogue output device.

PLAY OUT
Terminals
Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio
Out on an external device.

AUX1

MIC2 Connect your microphone to the MIC2 jack.
Use the VOL2 knob on the main unit to adjust the volume of a connected microphone
(MIC2).

VOL2
If you turn clockwise, the volume goes up, and if you turn counter-clockwise, the volume
goes down.
You can give an echo effect to the sound from a connected microphone (MIC2) by
adjusting the ECHO2 knob.

ECHO2
If you turn clockwise, the echo effect goes up, and if you turn counter-clockwise, the echo
effect goes down.
Connect the power cord to the Power jack and connect the other end of the power cord to

Power
a wall socket to supply electrical power to the Sound Tower.
• Be sure to match connector colours.
• If the external analogue output device has only one Audio Out jack, connect either left
or right.
• Press the (Source) button to select AUX2.
• If the product is in AUX2 mode with no playback and no command input for more than
20 minutes, the system will turn off.
• If the product is in AUX2 mode with playback for more than 8 hours and no command
input, the system will turn off.
• Be sure to match connector colours.
• If the external analogue output device has only one Audio In jack, connect either left or
right.
• If the product is in AUX1 mode with no playback and no command input for more than
20 minutes, the system will turn off.
• If the product is in AUX1 mode with playback for more than 8 hours and no command
input, the system will turn off.
ENG - 5