Your Internet Cable Is Not Plugged In; Message - Linksys MAX-STREAM AC4000 Mode D'emploi

Table des Matières

Publicité

Your Internet cable is not plugged in

If you get a "Your Internet cable is not plugged in" message when trying to set up your router, follow
these troubleshooting steps.
Make sure that an ethernet or internet cable (or a cable like the one supplied with your router)
is securely connected to the yellow Internet port on the back of the router and to the
appropriate port on your modem. This port on the modem is usually labeled Ethernet.
Make sure that your modem is connected to power and is turned on. If it has a power switch,
make sure that it is set to the ON or | (as opposed to O) position.
If your internet service is cable, verify that the cable modem's CABLE port is connected to the
coaxial cable provided by your ISP.

message

17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ea9300

Table des Matières