How To Back Up Your Router Configuration; How To Customize Linksys Smart Wi-Fi; Using Widgets; Customizing The Network Map - Linksys WRT1900AC Mode D'emploi

HOW TO BACK UP YOUR ROUTER CONFIGURATION

When you are done setting up your router, you should back up its settings so that
you can restore them later if necessary. For instructions, see "How to back up and
restore your router configuration" on page 42.

HOW TO CUSTOMIZE LINKSYS SMART Wi-Fi

You can customize your Linksys Smart Wi-Fi home page by adding or removing
widgets. Widgets are miniature versions of menus that let you change basic set-
tings or check the status of your network.

USING WIDGETS

To add a widget:
• Log into Linksys Smart Wi-Fi. (See "How to connect to Linksys Smart Wi-Fi" on
page 7.)
• Open a menu, then select Show widget on the homepage in the upper-right corner.
To remove a widget:
• On the home page, click the x in the upper-right corner of the widget you want
to remove.
WRT 1900AC | Setting Up: Basics

CUSTOMIZING THE NETWORK MAP

You can change the icon and name of each device on your network.
1. To change the name
a. Click on the device.
b. Click on Device Info in the pop-up window
c. Click on Edit in the upper right corner
d. Type in a new name
2. To change the icon
a. Click on the device
b. Click on Device Info in the pop-up window
c. Click on Change under the current icon
d. Choose a new icon from the available options
15