LENCO TFT-1021 Manuel D'utilisation page 19

When the cursor moves on the option in OSD menu, the values corresponding to this option on the right
of the menu press ▲▼ to move upward and downward to choose the options in OSD menu.
There are following options in OSD menu:
(1).OSD Option sets system menu mode; five modes is supported.
(2).Time on OSD Option sets whether to display system time in full-screen play channel. Move the cursor to
Time on OSD option, press ◄► to choose between ON and OFF.
(3).OSD Timeout Option sets some information hint dialogue box and displays time length, move the cursor to
OSD Timeout Option, press◄► to choose among 1-6 seconds.
(4).OSD Trans option sets menu transparency, press ◄► to adjust value between %0-%60.
(5).OSD Language option: The system has the user interface supporting a couple of languages; you can set
language via OSD Language option:
Move the cursor onto OSD Language option, Press ◄►to enter OSD Language List as shown in Figure 3.20
(6). 1st audio and 2nd audio Language option: Press ◄►to enter the currently supported Audio Language list,
in the Audio Language list, press▲▼ to choose language, press ENTER to confirm;
2. TV
TV setup provides convenient TV input mode, you can via menu (MENU->Digital TV->Configuration ->
TV) enter TV set, as shown in Figure 3.21
Figure 3.20
15