Regulatory Compliance Information - Acksys WLn-LINK-OEM-EVAL Guide D'utilisation Rapide

Mechanical characteristics
Dimensions (w/o antennas &
w/o WLn-LINK-OEM-TTL)
Weight (±1%) (w/o antennas &
w/o WLn-LINK-OEM-TTL)
Enclosure
Operating temperatures ranges
Storage temperatures ranges
Status indicators
Reset button
Power supply Input
Specifications
Connector
External source
Ethernet interface
Type
Connectors
Cable
Serial interface (only under ACKSYS agreement)
Type
Connectors
Specifications for the WLn-LINK-OEM are detailed in the "WLn-LINK-OEM
Hardware Manual" documentation, available on the accompanying CD-ROM
and the ACKSYS web site.

REGULATORY COMPLIANCE INFORMATION

This product must be only used for evaluation, demonstration or internal
development. It's not a "final" product hence it must be only manipulated by
qualified people. It may not meet the technical requirements from
international directives and so it is not compliant with any standards (CE,
FCC...).
Please see the compliance statement for the "WLn-LINK-OEM" product.
SPECIFICATIONS
L x l x h = 108 x 135 x 45 mm
L x l x h = 4.25 x 5.32 x 1.77 in
130 g (4.6 oz)
None
-10°C to +50°C (14°F to 122°F)
-20°C to +85°C (-4°F to 185°F)
11 LEDs: see LEDs definition section
Short push, anytime:
Long push (> 2 sec.):
- while operating:
- while in emergency upgrade mode:
- at startup:
- DC 12V +/- 5% with fuse
0451001.MRL)
- DC 5V +/- 5% w/o fuse and protection
- Jack Ø2.1mm
- Molex 15-24-4441 (type 8981-4M)
110/230VAC to 12VDC power supply,
12W, Jack plug with a 1.5m cable.
Auto MDI/MDI-X 10 Base T/100 Base Tx/
1000 Base T with automatic negotiation
(HDX/FDX), according to 802.3u.
RJ45 female
1 meter Ethernet cat.5e cable included
2 serial ports RS-232 type (TX/RX only)
SUB-D 9 pins male
-8-
 Reset
 Restore factory settings
 Restore factory settings
 enter emergency upgrade
and polarity protection,
(1A FF, réf :