Philips AVENT SCF291/01 Mode D'emploi page 18

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
English
18
Descaling
The sterilization process is extremely important to ensure the most hygienic standards
for your baby. Limescale deposits can slow down the sterilization cycle and even impair
its effectiveness.
Limescale is the hard and chalky deposit. Depending on the water type in your area,
limescale can have different appearances ranging from snow white looking powder
to brownish stains. The harder the water, the faster scale builds up. It builds up in
appliances as the residue of minerals naturally contained in water, which fail to
evaporate when water is heated. Although it is not harmful as such, it is unsightly, hard
to clean and can impair the operation of appliances or damage their components if
allowed to build up.
Descale the sterilizer at least every 4 weeks to ensure it works efficiently.
1
Pour 90 ml/3 oz of white vinegar (5% acetic acid) and
30 ml/1 oz of water into the water reservoir.
2
Place the small basket on the base. Place the lid on top
of the small basket.
3
SCF291: Press the power on button to switch on the
appliance.
SCF293: Turn the on/off button to "Sterilize" mode. Then
press it to switch on the appliance.
Note: Place the small basket on the base to prevent hot
liquid from splashing out.
SCF291
SCF293
1
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Avent scf293/01Avent scf293/00Avent scf291/00Avent scf293/02

Table des Matières