Philips AVENT SCF291/01 Mode D'emploi page 15

Drying (SCF293)
1
Assemble the sterilizer (see section "Assembling the sterilizer") and place the
items to be dried in it.
Note: Make sure all the items are completely disassembled and placed in the
basket with their openings pointing down for effective drying.
Be careful. Hot steam will come out of the sterilizer when drying starts.
2
Place the lid on top of the small or large basket.
3
Put the plug in the wall socket.
4
Turn the on/off button to "Dry" mode. Then press it to
switch on the appliance.
• Drying will start after about 30 seconds. The appliance
warms up to produce warm air to dry items.
• The progress indicator lights flash and off gradually to
show the appliance is drying.
• When the drying process is finished, the lights go off
and the appliance switches off automatically.
Caution: The base, the baskets and the lid become hot
during or shortly after operation.
5
Remove the lid.
6
Remove the bottles and other items from the basket. Use the tongs to remove
the smaller items.
Be careful. The dried items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch the dried
items.
Note: The drying result may vary depends on the ambient temperature, ambient
humidity and loading of sterilizer. You can run one more drying cycle if necessary.
7
Unplug the appliance and wait until the appliance has cooled down completely.
English
15
1
2