Operating The Device; Mains Connection; Insert Batteries Into The Remote Control - Medion MD 24285 Mode D'emploi



Operating the device

Mains connection

Danger!
Only use sockets that are in perfect condition. Unstable plugs
or sockets can cause fires. Reception may be impaired if
the plugs or sockets are defective. Do not use defective
sockets under any circumstances. Have defective plugs or
sockets repaired by a specialist before using the device.
Pull the plug out of the socket immediately if the plug or
power cable is damaged. Arrange for customer services to
exchange the mains cable with one of the same type.
Do not connect the device to the mains power until the
damage has been repaired. Otherwise there is a risk of an
electric shock.
Plug the mains plug into a properly installed and easily accessible socket
with 230V ~ 50Hz.
Connect the mains plug with the appropriate socket on the back of the
device.
On the front of the device the "
displayed on the screen.
The device is switched on using the "
up green when it switches to standby mode.

Insert batteries into the remote control

Open the battery compartment.
Insert two batteries (1.5V Micro, AAA/LR03) into the battery compartment.
Pay attention to the polarity +/- (the negative terminal faces the spring).
Close the battery compartment.
20
POWER
" button shines red and the time is
POWER
" button or the button lights