Spare Parts; Technical Specifications; Eu Declaration Of Conformity - Kärcher WPD 100 Basic Mode D'emploi

Operating voltage
Connection output max.
Minimum power protection
Water flow pressure
Water supply temperature
Water dispensed, max.
Temperature of chilled water *
Setting of CO pressure
2
Ambient temperature
Width
Depth
Depth with water connection
Height without support leg
Height with support leg
Weight
without base
with base
Sound pressure level during normal operation
*Factory setting, can be changed only by customer service. Minimum temperature 4°C.
max. permissible media temperature
max. permissible operating pressure
max. flow performance
max. capacity
Materials / approvals

Spare parts

Only use original accessories and spare parts, they en-
sure the safe and trouble-free operation of the device.
For information about accessories and spare parts,
please visit www.kaercher.com.
Warranty
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.

Technical specifications

Hy-Protect-Filter
+ 80°C
10,000 litres
All water-bearing parts/components are suited and approved for the use in direct contact with drinking water as
mandated by the industry standard.
The device was certified for food grade by the Institut Fresenius and meets the requirements of the mineral and
table water regulations.

EU Declaration of Conformity

We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements of the EU Directives, both in its basic design
and construction as well as in the version put into circu-
lation by us. This declaration shall cease to be valid if
the machine is modified without our prior approval.
Product: Water Dispenser
WPD
Type: 1.024-xxx
Relevant EU Directives
2006/95/EEC
2014/30/EU
2011/65/EU
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 60335–1
EN 60335–2–75
EN 61000–3–2: 2014
EN 61000–3–3: 2013
EN 62233: 2008
EN 50581
Applied national standards
-
Applied regulations
1935/2004
10/2011
The signatories act on behalf of and with the authority of
the company management.
Chairman of the Board of Management Director Regulatory Affairs & Certification
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2018/07/01
11
-
EN
WPD 100
V/~/Hz
W 300
A
MPa (bar) 0,15...0,6 (1,5...6)
°C
l/min
°C
Presetting 4 bar
Re-adjustable
°C
mm
mm
mm
mm
mm
kg 30
kg 45
dB(A)
Active pure filter
+ 35°C
0.6 MPa (6 bar)
120 l/h
10,000 litres
WPD 200 WPD 600
220...240/1/50
300 600
10
+4...+35
2
8
Presetting 3.0 bar
during dispensing of water 2.8...3.2
bar
+5...+35
365
530
600
465
1432
35 -
50 60
<60
Hy-Pure filter
+ 80°C
2,500 litres
25