Wolf Gourmet ICBWGCM100S-CE Manuel D'entretien Et D'utilisation page 15

GETTING STARTED
Using the Programme Start Time Function
The Start Time function allows you to programme the coffee system to brew at a later
time.
If you have not set the current time of day, please follow the
1.
steps shown in 'Setting the Time of Day for the First Time'.
Press and hold the Programme button for more than
2.
1/2 second to activate the Set Start Time function. The
Programme light will flash and the Programme icon will be
displayed next to the clock digits.
If a programmed start time has not been set previously, the
default start time of --:-- will flash on the display.
If a programmed start time has been set previously, the
previous start time will flash on the display.
Turn the Time/Cups knob clockwise to go forwards in time.
3.
Turn anti-clockwise to go backwards in time.
When you have finished setting the time, release the knob.
4.
After 5 seconds, the clock will change to show the time of
day and the Programme light will remain on.
If there is no water in the reservoir, the Add Water icon will
5.
display and the Programme light will not come on.
To turn off the Programme function, press the Programme
6.
button again for less than 1/2 second.
15