GYS SMART HUB MODUL Manuel D'utilisation page 15

Operating manual
TROUBLESHOOTING
Multi-charger mode :
Err27: Cable_NOK
Parallel charging cables fail
Multi-charger mode :
Err28: COM_NOK
Communication failure between chargers
FIXING
There are two possibilities for fixing:
 to the wall (screws not included)
1
 on the Gysflash XL-ND trolley - ref. 028890 (use the screws supplied with the trolley).
1
Translation of the original
instructions
168 mm
Load cables to be replaced.
Poor connection, check assembly (PHM).
No communication, check SHM mounting and SLAVE X char-
ger configuration.
DB9 cable(s) to be replaced.
SMART HUB MODULE
15