Westfalia Automotive 342112600001 Notice De Montage page 2

SIARR
51 - 17
ASSEMBLY
* Mark the 4 fastening holes on the side-members (X).
* Mount and then fasten the coupling at point X using
bolting block X, shifting the bottom of the bumper
slightly to facilitate access of the coupling.
* If necessary, insert the adjustment shims (A) and (B)
between the coupling and side-member.
FINISHING
* Fit the coupling head and socket support
at point Y using bolting kit Y.
* Tighten all of the nuts, bolts and screws
to the torques indicated below.
FASTENING KIT
4 off HM12x100 screws
4 off HM12 nuts
X
4 off DEC12 washers
4 off 12,5/35 plain washers
2 off HM12x60 screws
2 off HM12 nuts
Y
2 off DEC12 washers
1 off 12x27 plain washer
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 off HM16x45 screws
Z
2 off DEC16 washers
2 off HM16 nuts
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
Type Type
SI049 Approval No.
Tow bar for
Jeep Compass and e24*94/20*00*0080
Patriot (Standard)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM51\NDM5117-C - FOLIO NDMANG
!
Affix the sticker in the position
Max. Total Max. Total
Authori. Weight Towable Weight
1 980 kg 1 615 kg
34112600001
Max. Verti- Value
cal load D
105 kg 8,72 kN