BFL(T)
Servomotor Belimo
m
ounting
Dismantling the mechanism
Type BFL(T) on CR2/CU2/
CA2/CU4/CU2-15:
1. Unlock the motor by
interrupting the power
supply.
2. Loosen the two fixing
bolts of the motor and
remove the old motor.
3. For types BFLT: unscrew
the thermo-electric fuse
and remove it.
Type MFUS(P):
1. Unlock the existing
mechanism by pressing
the unlocking button.
2. Loosen up the two fixing
screws and dismantle
the mechanism.
Type BFL(T) on CR60/CR120/
CU-LT(1s):
1. Unlock the motor by
interrupting the power
supply.
2. Loosen the two fixing
bolts of the motor and
remove the old motor.
3. For types BFLT: unscrew
the thermo-electric fuse
and remove it.
3. Replace the old
membrane by the new
(unperforated) one.
Type BLF(T) on CR2/CU2/CA2/CU4/CU2-15:
1. Unlock the motor by
interrupting the power
supply.
2. Loosen the fixing bolts
of the motor and remove
the old motor.
3. For types BLFT: unscrew
the thermo-electric fuse
and remove it.
Type CFTH:
1. Unlock the existing
mechanism.
2. Loosen up the
three fixing screws
and dismantle the
mechanism.
K128 - A
08/2015
4. Loosen the three screws
and remove the base
plate.
Set aside the operating
arm, bolt and washer
to use on the new base
plate.
12