Features; Specifications - Macurco RD-6 Instructions D'utilisation

Features


ETL Listed to UL 61010-1 and CAN/CSA C22.2 No 61010-1

Low level meter capable of displaying from 0-1,000 ppm refrigerant gas

Selectable fan and alarm relay activation

5 A SPDT fan relay controls starters of exhaust fans

0.5 A N.O. or N.C. alarm relay connects to warning devices or control panels

4-20 mA Current Loop

RD-6 mounts on a standard 4x4 electrical box and becomes cover for the box

Supervised system: any internal detector problem will cause the fan & alarm relay to activate

Calibration verification test kit is available. One screw allows access for calibration or gas test

Specifications


Power: 3 W (max) from 12 to 24 VAC or 12 to 32 VDC

Current @ 24 VDC: 75 mA in alarm (two relays), 50 mA (fan relay only) and 23 mA stand by

Shipping Weight: 1 pound (0.45 kg)

Size: 4 1/2 x 4 x 2 1/8 in. (11.4 X 10.2 X 5.4 cm)

Color: Dark gray

Connections: plugs/terminals

Mounting box: (not included) 4x4 electric

Fan relay: 5 A, 240 VAC, pilot duty, SPDT, latching or non-latching

Fan relay actuation: selectable at diS (disable), 100 (default), 150, 200, 250, 300, 350ppm

Fan Delay Settings of 0, 1, 3 (default), 5 and 10 minutes

Fan Relay Minimum Runtime settings are 0 (default), 3, 5, 10 or 15 minutes

Fan relay latching or not latching (default) selectable

Alarm relay: 0.5A 120 V, 60 VA

Alarm relay actuation: selectable N.O. (default) or N.C.

Alarm relay settings: diS, 100, 150, 200, 250, 300 (default), 350, 400, 450, 500, 550 or 600ppm

Current Loop: 4-20 mA for 0-1,000 ppm refrigerant gas, selectable to off or on (default)

Buzzer: 85 dBA at 10cm settable to on (default) or off

Digital display: 3 digit LED selectable to on (default) or off

Operating environ: 0°F to 125°F (-18C to 52C).10 to 90% RH non-condensing
6