Télécharger Imprimer la page

Fracarro CB-700WDR Manuel Utilisateur page 16

Publicité

Les langues disponibles

Les langues disponibles

Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep
this manual for future reference.
Safety Warnings
Read this manual carefully before installing the unit
Please read this manual first for correct installation and operation.
Never install the camera on a ceiling that cannot hold its weight
The product may fall down and cause damages.
Never install the camera near electric or magnetic fields
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers since
the magnetic fields generate from above devices would distort the video image.
Never install or use the camera in areas exposed to water, oil or gas
The water, oil or gas may result in operation failure, electric shock or fire. Do not use this unit near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool,
in an unprotected outdoor installation, or any area which is classified as a wet location.
Never face the camera toward the sun
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
Power Cord Protection
Touching the wet power cord with hands or touching the power cord with wet hands may result in electric
shock. Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, playing particular attention to cords and plugs, convenience receptacles, and
the point where they exit from the appliance.
Attachments
Do not use attachment not recommended by the product manufacturer as they may cause hazards.
Object and Liquid Entry
Never push objects of any kind into this product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto the
product.
Do not operate the camera in environments where the temperature, humidity or power source is beyond the
specified ones. Use the camera in suitable environments where the temperature is within -10°C~50°C and
humidity below 90%. Use the input power source as the specifications listed.
Cleaning
Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
Stop using when the product emits smoke or abnormal heat
Servicing
Do not attempt to repair this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
Retain Instructions
The safety and operating instructions should be retained for future reference.
NOTICE:
The information in this manual was up-to-date when published. The manufacturer reserves the right to revise
and improve its products. All specifications are therefore subject to change without notice.
In conformity with standard EN 50130-4 (European directives 2004/108/EC - EMC).
In accordance with the European Directive 2004/108/EC (EMC), the product shall be installed using devices,
cables and accessories that allow to comply with this directive requirements for fixed installations.
16

Publicité

loading