Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
KEY TAKEOVER AFTER REMOTE STARTING
1
STEP
2
STEP
PRESS RELEASE PRESS
1 SEC.
3
STEP
If the vehicle is not unlocked with one of these conditions the remote-starter will
shut down as soon as any door is opened.
4
STEP
5
STEP
LOW BATTERIES WARNING
FUNCTIONNALITY
START
STOP
ENGINE
2 MIN.
3 SEC.
OR
CONFIRMATION
PAUSE
BLIP
BLIP
1 SEC.
All doors must be closed.
To remote-start the vehicle press the ! HOLD button
1 second release and press the ! HOLD button
again for approximately 3 seconds.
Unlock the doors with either:
• The OEM remote
• The remote-starter remote
• Or the proximity remote
Enter the vehicle with the Intelligent Key.
The vehicle can now be put in to gear and driven.
If the batteries are dead, you will no longer be
able to start the vehicle with this remote control.
If after the confirmation sound from LOCK or
UNLOCK command, two more chirps are head,
replace the batteries.
To replace the batteries (2x CR2016), life the
cover with the logo.
AFTER APPROXIMATIVELY 2 MINUTES OF INACTIVITY
(for example, no door is open) the vehicle will
no longer be allowed to start with the RM9MA
remote.
To allow the vehicle to start, press the UNLOCK
button on the remote control.
Publicité
Table des Matières
