Removing The Battery From The Battery Charger - Dell X0350 Guide De Configuration

CAUTION: If you are using a multiple-outlet power strip, use caution when you
plug the AC adapter power cable into the power strip. Some power strips may
allow you to insert the plug incorrectly. Incorrect insertion of the power plug
could result in permanent damage to your computer, as well as risk of electric
shock and/or fire. Ensure that you insert the ground prong of the power plug into
the mating ground contact of the power strip.
Battery operating time varies depending on operating conditions. You can use the battery
charger to charge a 28-WHr battery or an optional 65-WHr extended battery.
While the battery is charging, the battery charger light is green. When the battery is 82%
charged, the battery charger light blinks green. When the battery is fully charged, the
battery charger light is off. If errors occur while charging, the battery charger light blinks
amber.
For information on resolving battery problems, see "Solving Problems" in the Dell Latitude
X300 User's Guide or the Dell Inspiron 300m Owner's Manual.
Removing the Battery From the Battery
Charger
CAUTION: Before performing any of the procedures listed below, read and follow
the safety instructions.
NOTICE: When you disconnect the AC adapter from the battery charger, hold the adapter cable
connector, not the cable itself, and pull firmly but gently to avoid damaging the cable.
Disconnect the AC adapter from the electrical outlet and the battery charger.
1
Slide the battery charger latch and gently pull the battery out of the battery charger
2
connector.
Batter y Charger Setup Guide
17