Section 3 − Installation; Specifications; Description - Miller RAD-400 Mode D'emploi

3-1. Specifications

Wire Feed Speed Wire Feed Speed
Model Model
Range
20 To 400 ipm
RAD−400
(0.5 To 10 mpm)
30 To 780 ipm
RAD−780
(0.7 To 19.8 mpm)

3-2. Description

SECTION 3 − INSTALLATION
Wire Diameter Wire Diameter
Range
3/32 To 7/32 in
(2.4 To 5.6 mm)
1/16 To 1/8 in
(1.6 To 3.2 mm)
Type Of Input Type Of Input
Rating Rating
Power
1/4 HP,
115 VDC
85 RPM
1/4 HP,
115 VDC
143 RPM
1
Input Power Input Power
Weight Weight
Cord
33 lb
24 in (0.61 m)
(15 kg)
33 lb
24 in (0.61 m)
(15 kg)
1 Motor/drive Assembly
This unit is a heavy-duty wire feed-
ing motor/drive assembly designed
for automated Submerged Arc
Welding (SAW) applications.
The various model designations in-
dicate information about the specif-
ic model. The units are offered in ei-
ther low speed or standard speed
drives.
Ref. 804 965-A
OM-1598 Page 5