Setting The Clock; Colour Rgb Button; Setting The Alarm; Cancelling/Disabling The Alarm - Bigben AKSO Mode D'emploi

Setting the Clock

• In standby mode, long press the
• Press the /
• The clock will display in 24-hour format.
• Press the
• Press the button to control the brightness of the LCD display.
There are 3 levels: High (Bright)
• When long pressing, the light colours will change in sequence. Long press the button again to turn
off the function.

Colour RGB button

• Press the button to select the desired light colour. You may select from 7 colours.
• Users may select from 5 brightness levels. Press the button to choose the level.

Setting the Alarm

• In standby mode, press & hold the
• Press the /
the time.
• As a next step, to set the music, press
• Alarm output sound: 1) BB – Buzzer
• Press the
• Next, set the alarm sound output level setting. Press the
sound output level.
• Press the
• The indicator light is "ON" on the display.
• When the alarm rings, the light is also "ON" ,
• Press any key to turn off Alarm 1 or 2.
• The alarm clock will resume the function at the same time the next day.
• The unit features a dual alarm. Repeat the above steps to set
• Crescendo function: 30 minutes before alarm time set to wake up, light will turn from white to yellow.
This function is only for 30 minutes before alarm time.
Cancelling/Disabling the Alarm Function:
• In standby mode, press
button to enter the time mode.
button to set the hour and minute.
Low (Dim light)
button to select the time (Hour/Minutes), then press the
2) USB Music
3) FLASH: Press
6 music( 01,02,03,04,05,06)
4) REC (recording sound/music)
or to cancel / disable the alarm function.
OFF.
/ to choose your preferred option below.
( to enter FLASH mode. Press
/
- EN 5 -
/
button to choose your preferred
& select the alarm output.
to select