Unpacking And Checking; Scope Of Delivery; Assembly And Adjustment Tasks - Meister MSE800-1 Traduction Du Manuel D'utilisation Original

5454000-Saebelsaeg_man 03.12.14 08:23 Seite 51
The specified vibration emission value
was determined when carrying out
surface grinding. When used for other
applications, the vibration emission
value may deviate. The specified
vibration emission value was measured
in accordance with a normed test
procedure and can be used in order to
compare one electrical tool with
another.
The specified vibration emission value
can also be used for an introductory
evaluation of the influence.
CAUTION! The vibration
emission value may fluctuate
from the specified value during use of
the power tool. These fluctuations will
depend on the way in which the
power tool is used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the influence
must be made whilst taking account
of the actual conditions of use. (All
parts of the operating cycle must be
taken into account for this purpose.
This also includes times in which the
power tool is switched off and times
in which it is switched on, but is
running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this machine. Therefore, carry out
noise-intensive work during permitted
times. Maintain any quiet periods and
limit the duration of your work to the
absolute minimum.
CAUTION! The effects of noise
may cause damage to hearing.
Therefore, only work with suitable
hearing protectors. People in the
vicinity should also wear suitable
hearing protectors.
6 – Unpacking and checking
Check the parts supplied
• Open the packaging and take the
machine out carefully.
• Remove the packaging material as
well as the packaging and transport
safety mechanisms (if present).
• Check whether the scope of delivery
is complete.
• Check the sabre saw and accessory
parts for transportation damage.
• Keep the packaging until the
guarantee period has expired, if
possible.
Caution! The machine and
packaging material are not toys.
Children may not play with plastic
bags, foil or small parts! There is a
risk of swallowing and suffocation!
7 – Scope of delivery
• Sabre saws
• 3 saw blades for wood
• 1 saw blade for metal
• Operating instructions
• Guarantee certificate
8 – Assembly and
adjustment tasks
CAUTION! Before carrying out
any work on the machine, always
pull the plug out of the socket!
Changing the saw blade (Figure 2/2a)
CAUTION! Disconnect the power
before each saw blade change!
51