Basic Operations; Turning On The Phone; Turning Off The Phone; Answering A Call - UMX MXC-570 Mode D'emploi

6. Basic Operations

Turning on the phone

Press the End/On/Off key and hold for 5-6 seconds. The phone will automatically search the network as long as
the phone has no password protection. After the phone has registered on the network, the signal strength will
be displayed at the top right corner of the screen. The phone is now in the standby state and you can make or
answer a call.
Your phone remains in a searching state if it fails to find the available network system.
If a password for the phone is required after it is switched on, please input the password, and then press the
right soft key for confirmation. After unlocking, the phone will display the signal strength.

Turning off the phone

Press the End/On/Off key and hold for 5-6 seconds.
Warning: If you switch off the phone by removing the battery, you may lose stored information.

Answering a call

Press the Answer/Send key.

Dialing a phone number

In the standby state, enter the telephone number (include country and area codes if necessary) and press the
Answer/Send key.

Rejecting an incoming call

Press the End/On/Off key.
17