Navigation Keys And Soft Keys; Standby Screen; The Keypad; Backlight - UMX MXC-570 Mode D'emploi

return to standby menu. Pressing and holding this key will switch the phone on or off.

Navigation keys and Soft keys

The Navigation key is used to scroll across the screen. The button at the center of the Navigation key is used to
Select an item.
The Left Soft key is used to enter the menu.
The Menu Return/Right Soft key is used to return to the previous menu. The functions of the two soft keys
depend on the application and the functions that are being accessed.
The End/On/Off key is used to return to the standby screen from anywhere in the menu.

Standby screen

The Standby screen provides user the ability to access 5 common and frequently used icons: Contacts,
Messages, Multimedia, Calendar and Info Portal. The Navigation key is used to scroll across the icons and the
Select button is used to make the selection.

The Keypad

Keys from 0 to 9, * and # are used for dialing. Inputting password, letters, symbols etc., is accomplished by the
QWERTY keyboard. See the section on input method for further details.

Backlight

After the mobile phone is in standby for a period of time (length of time is set by the user), the phone will turn
off the screen backlight to save power. If the screen backlight goes out, you can press any key on the phone's
keypad to turn on the backlight again. Backlight off delay time can be changed by the following steps:
14