Update; Checking The Firmware Version; Updating The Firmware - Pioneer SGX-CA900 Mode D'emploi

Update

EN
Update performs an update of the device's firmware.
• To update the firmware, you need to install "Pioneer Cycle
Cloud Connect" application on your PC. For information
about how to install and use the "Pioneer Cycle Cloud
Connect" application, refer to the SGX-CA900 support page.
[For American Users]
http://www.pioneerelectronics.com
[For Canadian Users (ENGLISH)]
http://www.pioneerelectronics.ca/POCEN/Support
[For Canadian Users (FRENCH)]
http://www.pioneerelectronics.ca/POCFR/Soutien
[For European Users]
http://www.pioneer.eu/eur/support/page.html
• Charge the device before the update. If the device is not
charged fully, the message appears and the update cannot
be performed.
• If the device is logging, stop logging and save the log data
before the update.

Checking the Firmware Version

Before updating the firmware, use the procedure below to
check the device's current firmware version.
1
On the home screen, tap the [Settings] icon.
This displays the settings menu.
2
Tap [System] and then check the number under
[Firmware Version].
54

Updating the Firmware

You can update the device's firmware by transferring update
data from the server to the device.
1
If the device is connected to the PC with the
USB cable, disconnect it.
2
On the home screen, tap the [Settings] icon.
The settings menu is displayed.
3
Tap [System] - [Firmware Update].
The message that confirms to save settings and firmware
update will appear.
4
Tap [OK].
The backup data is created automatically and update
mode is activated.
• The device's entire screen becomes white in update mode.
5
Activate the update software from your PC.
6
Connect the device to your PC.
Use the provided USB cable to connect the device to
your PC.
• For information about connections, refer to "Charging the
Device" under "Charging" (Ü page 6).
7
Select the firmware by PC update software and
start to update.
The message will appear on PC update software when
the update is completed.
• The update process may take some time. Do not disconnect
the USB cable from the PC or move on to the next step until
the update success message appears as this may cause a
malfunction.