Hardware Installation - IOGear GTD735 Guide De Démarrage Rapide

Hardware Installation

STEP 1. Connect the included AC Adapter to the DC input port on the
docking station.
STEP 2. Connect a DisplayPort cable from the docking station to the
external DisplayPort Monitor for up to 4K of resolution.*
STEP 3. You can connect a USB-C 4K Monitor directly to the rear
Thunderbolt 3 port. For USB-C monitor setup, simply plug in the USB-C
cable from your monitor to the Thunderbolt 3 port. If your second
monitor is equipped with HDMI, DisplayPort or VGA input, use an
USB-C to video adapter to connect it to your monitor.**
If you do not need to utilize the rear Thunderbolt 3 port for video, you
can connect a Thunderbolt 3 device to the rear Thunderbolt 3 port.
or
D i
s p
l a y
P o
r t
D i
s p
l a y
P o
r t
D is
p la
y P
o r
t
D is
p la
y P
o r
t
2