Honeywell HZ-340E Manuel D'utilisation page 6

3. Allow the ceramic heater to cool for at least
20 minutes.
4. Remove any objects blocking the air intake
vent (13) or air exhaust vent (2), which
could have caused the fault.
5. Resume using the ceramic heater as
described under „instructions for use".
6. Should the ceramic heater fail to resume
the heating operation, turn the rotary
power switch (3) to the OFF position (4)
and disconnect the power plug from the
power socket. Follow the instructions in the
guarantee conditions.
CLEANING
We recommend that you clean the ceramic
heater regularly. So as not to impair the
functioning of the ceramic heater, please follow
the cleaning instructions.
Cleaning
1. Before you start cleaning the ceramic
heater, turn the rotary power switch (3) to
the OFF position (4) and disconnect the
power plug from the power socket.
2. Clean the air intake vent (13) and the air
exhaust vent (2) with a vacuum cleaner, in
order to remove dust from the motor and
heating element.
3. Clean the outer surfaces of the ceramic
heater with a soft, damp cloth.
4. Resume using the ceramic heater as
described under „instructions for use".
ENGLISH
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes
responsibility for the correct use and care of this
ceramic heater according to these operating
instructions. The purchaser or user must himself
or herself decide when and for how long the
ceramic heater is to be in use.
WARNING: IF PROBLEMS ARISE WITH
THIS CERAMIC HEATER, PLEASE OBSERVE
THE INSTRUCTIONS IN THE GUARANTEE
CONDITIONS. DO NOT ATTEMPT TO
OPEN OR REPAIR THE CERAMIC HEATER
YOURSELF, AS THIS COULD LEAD TO
TERMINATION OF THE GUARANTEE AND
CAUSE DAMAGE TO PERSONS AND
PROPERTY.
Technical modifications reserved.
6