Important Safety Information; English - Honeywell HZ-340E Manuel D'utilisation

IMPORTANT SAFETY INFORMATION

Read through all the instructions before starting
to use the ceramic heater. Keep the instructions
carefully for future use.
1. Only use the ceramic heater in a location
that is inaccessible to children.
2. Do not use the ceramic heater outdoors.
3. Stand the ceramic heater on a firm, even
surface. Make sure it is standing securely so
that the ceramic heater can neither tip over
nor fall off. Only operate the ceramic heater
in an upright position.
4. Unwind the power cable completely. A
power cable that is not completely unwound
can cause overheating and a fire.
5. Do not use an extension power cable, an
infinitely variable speed controller or a
timer. This can lead to overheating and
cause a fire.
6. Only connect the ceramic heater with a
single-phase power socket with the Voltage
as given on the type plate of the ceramic
heater.
7. Always switch the ceramic heater off and
disconnect it from the power socket when it
is not in use, or before it is handled, moved
or cleaned. Do not tug at the cable to
disconnect the plug from the socket. Always
use the transport grip (15) at the back of the
ceramic heater. Do not leave the ceramic
heater unattended for a longer period.
8. Do not use the ceramic heater anywhere
near inflammable gases or materials such as
solvents, laquer, glue, etc.
9. Do not stand the ceramic heater
immediately beneath a power socket.
10. Do not use the ceramic heater near a
bathtub, shower or swimming pool.
11. Do not use the ceramic heater in any kind
of vehicle (e.g. construction vehicle, lift,
elevator, caravan, automobile, driver's
cabin) or in any similar enclosed space.
12. Warning: The air exhaust vent (2) of the
ceramic heater gets hot during use.
Burnable materials such as cushions,
pillows, bedding, furniture, paper, curtains
and clothing must be kept at least 100cm
away from the ceramic heater.
13. Keep the ceramic heater clean. Make sure
that the air intake vent (13) and air exhaust
vent (2) are open before starting to use the
ceramic heater. No objects must be allowed
to get into the air intake vent (13) and air

ENGLISH

exhaust vent (2).
heater up. This can cause overheating, a
fire or an electric shock.
14. Do not immerse the ceramic heater in water
or any other liquids and do not spill water
or any other liquids over the appliance or
the air intake vent (13) and air exhaust
vent (2).
15. Clean the ceramic heater regularly
according to the cleaning instructions.
16. If the power cable (14) of the ceramic
heater is damaged, it must be repaired at a
workshop authorized by the manufacturer,
as special tools are needed
17. Do not use the ceramic heater if it is
damaged, or could show any signs of
damage, or does not function correctly.
Disconnect the power plug from the power
socket.
CONSTRUCTION
1. Safety distances
2. Air exhaust vent
3. Rotary power switch
4. OFF (0)
5. Warm air 1000 W (I)
6. Hot air 1500 W (II)
7. Warm air 1000 W oscillating (I)
8. Hot air 1500 W oscillating (II)
9. Rotary thermostat switch
10. Lowest temperature setting (MIN)
11. Highest temperature setting (MAX)
12. Operating control lamp
13. Air intake vent
14. Power cable and power plug
15. Transport grip
FIRST TIME OF USE
1. Read through all the instructions before
starting to use the ceramic heater.
2. Unpack the ceramic heater and the power
cable. Remove all packaging materials and
dispose of them in an environmentally
friendly way.
3. Place the ceramic heater on a firm, even
surface. Make sure the ceramic heater is
standing securely so that it cannot tip over
or fall off. A safety distance of at least
100cm from other objects must be
observed.
4
Do not cover the ceramic