Hama HOME L410 Mode D'emploi page 11

6. Troubleshooting
Fault
The power
lamp (6) does
not continuous-
ly light up in
red.
Pouches are
not laminated
properly.
NOTE
Contact our customer service department if the problem re-
mains after you have taken the steps detailed above.
Home L410
Possible cause
On/Off switch (7) on
the right-hand side
of the device is on
position 0.
The power cable
(3) is not connected
correctly.
No mains power.
Device is faulty.
The required tem-
perature has not yet
been reached.
Solution
Switch the On/Off switch
(7) to position I.
Ensure that the plug is
connected to the electri-
cal socket.
Check your fuse box.
Inform our customer
service department.
Wait for the ready light (6)
to become solid green.
g
11