Maintenance And Cleaning - DIGEL HEAT CL-Serie Instructions D'utilisation Et De Montage

5
5.1
For cleaning the infrared heater:
1. Disconnect the mains plug before cleaning the infrared heater or break the
2.
3.
4.
22
Maintenance and
cleaning
electric circuit with the safety switch.
Make sure that the infrared heater is completely cooled off.
Wipe the infrared heater with a soft cloth or chamois that is moistened with
a solution of non-abrasive cleaning agent and a few drops of warm water.
ATTENTION! The infrared heater must never be kept under running water or
submerged in water. The heating elements must never be cleaned with a wet
cloth or water spray. Abrasive agents, sharp and aggressive cleaners and
rough cleaning cloths should not be used.
Wipe off any residual moisture with a dry cloth.
WARNING! The heating element must be completely dry before a re-start.