Operating The Cooling Device Safely - Dometic MF05M Mode D'emploi

Safety instructions
2.2

Operating the cooling device safely

!
CAUTION! Failure to obey these cautions could result in minor or moderate
injury.
Electrocution hazard
• Before starting the cooling device, ensure that the power supply line and the plug are
dry.
• Never start the device when your hands are wet.
Health hazard
• Opening the cooling devicefor long periods can cause significant increase of the
temperature in the compartments of the device.
• Clean regularly surfaces that can come in contact with food and accessible drainage
systems.
• Store raw meat and fish in suitable containers in the device, so that it is not in contact
with or drip onto other food.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the door open to prevent mould developing within the device.
A
NOTICE! Damage hazard
• Caution – risk of overheating
Always make sure there is sufficient ventilation so that heat generated during normal
operation can dissipate. Make sure that the device is sufficiently far away from walls
and other objects so that the air can circulate.
• Ensure that the ventilation openings are not covered.
• Never immerse the cooling device in water.
• Protect the cooling device and cables against heat and moisture.
• Only operate the device when you can attend to it.
• Do not operate the device on hot surfaces.
• Never place the device near naked flames.
• Do not fill the liquid which you wish to cool directly into the device. Instead, use the
glass included in the scope of supply.
6
MyFridge MF05M, MF1M
EN