Audio Button; Software Upgrade - Samsung HW-D550 Manuel D'utilisation

POWER
TV POWER
TV INFO
TV
VOL
MUTE CH
3D SOUND
SOUND MODE
POWER
TV POWER INPUT
S.VOL
SELECT
TV INFO
TV AUTO
VOL
CH
MUTE DIMMER DRC
POWER
3D SOUND
SOUND MODE
INPUT
S.VOL SPK CONTROL HDMI
SELECT
AUTO
DIMMER DRC POWER
SPK CONTROL HDMI
S/W LEVEL AV SYNC
S/W LEVEL AV SYNC
AUDIO
AUDIO
AH59-02330A
AH59-02330A
POWER
TV POWER
TV INFO
TV
VOL
MUTE CH
3D SOUND
SOUND MODE
POWER
TV POWER INPUT
S.VOL
SELECT
TV INFO
TV AUTO
VOL
MUTE CH
DIMMER DRC
POWER
3D SOUND
SOUND MODE
INPUT
S.VOL SPK CONTROL HDMI
SELECT
AUTO
DIMMER DRC POWER
SPK CONTROL HDMI
S/W LEVEL AV SYNC
S/W LEVEL AV SYNC
AUDIO
AUDIO
AH59-02330A
AH59-02330A
SOFTWARE UPgRADE
Samsung may offer upgrades for the Crystal Surround
Air Track's system's firmware in the future.
Please visit Samsung.com or contact the Samsung call center
to receive information about downloading upgrades and
using a USB drive.
Upgrades will be possible by connecting a USB drive to the
USB port located on your Air Track.
▪
Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit.
▪
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The
main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings. We recommend
you write down your settings so that you can easily reset them after the upgrade.
▪
If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
▪
For upgrading purposes, do not format USB data in NTFS because it is not a supported file system.
▪
Depending on the manufacturer, the USB may not be supported.
0
using the Anynet+(HDMI-CeC) function
Anynet+ is a function that enables you to control other Samsung Devices with
your Samsung TV's remote control.
Anynet+ function turns on and off each time you press Anynet+.
1. Connect the product to a Samsung TV with the HDMI cable.
(See page 15)
2. Set the Anynet+ function on your TV. (See the TV instruction manual
for more information.)
▪
The Anynet+ function supports some buttons of the remote control.
(TV POWER, TV INFO, TV CH)
▪
Depending on your TV, certain HDMI output resolutions may not
work.
▪
Please refer to the user's manual of your TV. Please check the
logo (If your TV has an
Anynet+ function.)

AuDIo button

This button enables you to select between listening to audio from your TV
or audio from the Air Track when connected via HDMI.
Press AuDIo on the remote control of this unit.
AUDiO MODE MODE
TV
HDMi in
AVR
TV
ARc
AVR
logo, then it supports
Scroll Display Display
HDMI AUDIO TV SND TV
HDMI AUDIO AVR HDMI
SOUND TV S MUTE
SOUND AVR TV ARC