Charging Case; Getting Started - Aukey EP-T10 Mode D'emploi

Charging Case

Charging Input
Charging Time
Battery Type
Number of Earbuds Recharges
Weight

Getting Started

Fully charge the charging case before first use. Connect the charging case to a USB
charger or charging port with the included USB-A to C cable. Or use a wireless charger
(5W) to charge the charging case. When the LED charging indicator turns solid white,
the charging case is fully charged. Charging takes around 1.5 hours. Charge and store
the earbuds in the charging case. After being fully charged, the case can fully charge
the earbuds 3 times. When charging the earbuds (with power disconnected), the
charging indicator will turn white for 30 seconds and then turn off; the LED status
indicators on the earbuds will light up white with a continuous breathing effect. When
the status indicators turn off, the earbuds are fully charged. The charging indicator will
flash white when the charging case has low power.
DC 5V
1.5 hours
Li-Polymer (400mAh)
3 times (pair)
61g / 2.15oz
- 04 -