Rugged Design; Shipping And Storage Mode; Restore Factory Settings; Troubleshooting - Goalzero VENTURE 30 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6

RUGGED DESIGN

Venture 30 comes equipped with an IPX6 rating. Spray it down, take it to the beach, leave
it in the rain – and never worry about rubber plugs. It's engineered to get out, stay out and
handle whatever Mother Nature can throw your way – even a quick drop in a puddle.
Do not submerge Venture 30.

SHIPPING AND STORAGE MODE

If you won't be using Venture 30 for long periods of time, reactivate the shipping/storage
mode to prevent self-discharge. This also resets Venture 30 to default factory settings.
1. Hold the Battery button for approximately 30 seconds, until the lights flash.
2. Release the Battery button.
3. Exit this mode by plugging Venture 30 into a live USB source.

RESTORE FACTORY SETTINGS

Used to erase all saved charging profiles and set Venture 30 to shipping/storage mode.
1. Press and hold the Battery button for approximately 30 seconds until the lights flash.
Venture 30 is now reset and in shipping/storage mode.
2. To reactivate Venture 30, plug it into a live USB port, the blue lights will flash, indicating
Venture 30 is ready for charging.
Lost charging cable? That's OK, Venture 30 can be charged from any micro-USB cable. You
can also buy a new one from us at GoalZero.com
6

TROUBLESHOOTING

Gear not charging?
1. Check the battery level of Venture 30 by pressing the Battery button. When Venture 30's
battery is dead, the first blue indicator light will flash when the Battery button is pushed.
2. Charge up Venture 30 by using the included cable or solar.
3. Try a soft reset of Venture 30 (see below).
Soft Reset: Used to restart a frozen Venture 30, or if you're having trouble charging gear.
1. Press and hold the Flashlight button for approximately 30 seconds. You'll see an initial
flash of the lights, indicating you're entering flashlight selection mode.
2. Continue holding until the lights flash twice in a row. The blue LED lights will also flash,
indicating a successful reset.
3. Press the Battery button or wait 5 seconds to resume normal operation.

TECHNICAL SPECIFICATIONS

Venture 30 Recharger
CHARGE TIMES:
GOAL ZERO Nomad 7
8-16 hrs
GOAL ZERO Nomad 13
6-12 hrs
GOAL ZERO Nomad 20
5-6 hrs
2A USB Source
5 hrs
BATTERY:
Cell chemistry
Li-ion NMC
Cell type
18650 by LG chem/
Samsung
Cell capacity
28Wh (3.6V, 7800mAh)
Lifecycles
hundreds of cycles
Shelf-life
Keep plugged in, or
charge every 3-6 months
Fuses
none
Management system
Charging and low-battery
protection built-in
Be sure to ACTIVATE YOUR WARRANTY
at goalzero.com/warranty
PORTS:
USB port (output)
5V, up to 2.4A (12W
max), regulated
USB-micro port (input)
5V, up to 2.1A (10.5W
max)
GENERAL:
IP Rating
IPX6
Chainable
No
Weight
8.8 oz (250g)
Dimensions
4.5 x 3.25 x 1 in (11.4 x
8.25 x 2.5 cm)
Operating usage
-4-140F (0-40C)
temperature
Certifications
CE, FCC, ROHS
Warranty
12 months
7

Publicité

Table des Matières
loading

Produits Connexes pour Goalzero VENTURE 30

Table des Matières