Appliance Description; Before First Use - Inventum CNB406T Mode D'emploi

2

appliance description

1. Lid with drinking spout - 2 x
2. Bottle to-go - 2 x
3. Knive assembly
4. Base
5. Control knob with speed settings
6. Feet with suction cups
3

before first use

Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the packaging
material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after unpacking for any
damage, possible from transportation. Place the mixer on a flat and stable surface. Rinse all the accessories - bottles, knives and lids -
with warm soapy water and dry them thoroughly. Wipe the base with a damp cloth. Always roll out the cord completely.
When the mixer is in use, the ingredients will be transported along the sides of the bottle to the top and will come down through the
middle. This system guarantees that even ice cubes will be completely crushed.
Make sure that all the parts are dry before you use the appliance.
• Place the mixer on a flat and stable surface as soon as you have rolled out the cord. The mixer has suction cups at the bottom.
These ensure the mixer will stand steady. Attention: the suction cups function best on a smooth clean surface. Practice a few
times to disassemble and assemble the mixer without any ingredients.
• The base contains the motor. Because of it's size, the housing is very stable.
• The control knob regulates the speed of the mixer. The mixer has 2 speeds and a pulse (ice crush) setting.
- setting P = pulse
- setting O = off
- setting 1 = lowest speed
- setting 2 = highest speed
• The mixer can crush ice cubes with the pulse setting. This means that the mixer is only activated when you turn the knob to the
pulse setting. As soon as you let go of the button the mixer will be deactivated.
10 • English
CNB406T-instructions.indd 10
1
2
3
4
5
6
1
2
3
4-6-2018 13:38:32