Channel Search (Scan Mode); Technical Data - Dexford PMR700 Mode D'emploi

4.8

Channel search (scan mode)

When channel search (scan) is switched on, all 8 channels are polled until the radio finds a
channel that is being used for speech.
MENU
1. Press the
2. Press switch on the scan mode. The
3. Confirm with the PTT talk button on the left side. The
4. Channel search is started by means of the
with these buttons.
5. If a channel is found, which is being used for speech, the channel search will stop and you
will be able to hear the conversation.
6. To deactivate this function once more, press the
button. Confirm with the PTT talk button on the left-hand side.
5

Technical data

PMR channel frequencies (MHz)
Transmitter power
Power
Battery life in standby
Technical data are subject to change without previous notice.
26
button twice. The
- English -
- -
indicator will appear in the display.
- y
indicator will appear in the display
e button. You can start the scan again
MENU
446 MHz
500mW
3 x AAA Alkaline or rechargeable
Ni-MH batteries
up to 120 hours
indicator will appear in the display.
button twice and then the
.