Directional Exhaust; Quick Release Door; Accessories - Bostitch T50 Manuel D'instructions

Always disconnect air supply: 1.) Before making adjustments; 2.) When servicing the tool;
3.) When clearing a jam; 4.) When tool is not in use; 5.) When moving to a different work
area, as accidental actuation may occur, possibly causing injury.
Models T50S2, T50S4 and T50S5 contain a Quick Release Door feature. The door is designed to "pop" open
if a jam occurs providing easy access for removing a jammed fastener.
If the door does not "pop" open when a jam occurs, it can easily be opened with a screwdriver, as shown in
FIG. 1. Use a firm twist on the screwdriver to open the door, see FIG. 2.
The door will not open completely if the driver is still down. To open the door completely the driver must be
pushed back into the tool.
The "Quick Release Door" makes cleaning the nose and front portion of the magazine a rapid and easy
operation with a minimum of effort.
To close the door simply press the door firmly against the edge of the work table or suitable stationary object
until the two latch pins snap into a locked position.
CAUTION:
Do not use your hands to close the door as injury may occur if skin is pinched
between the door and nose when the latch pins engage.
Loosen screw as shown. Adjust to desired exhaust direction and tighten screw.
BC601
BC602
BC603
BC604
100679
851325
851385
N80K2
ORK1
BK6
107704
CNTK2
TVA6
FIG. 1
DIRECTIONAL EXHAUST DEFLECTOR
4 oz. Bostitch Air -Tool Lubricant
1 pint Bostitch Air -Tool Lubricant
1 pint Bostitch "Winter-Formula" Air-Tool Lubricant
1 quart Bostitch Air -Tool Lubricant
O-Ring Lube (1lb. can)
Locite Grade 271 (.02 oz.)
Locite Grade 242 (.02 oz.)
Remote Control Kit
O-Ring Kit
Bumper Kit
Foot, Contact Arm
Kit, Contact Trip Conversion (Black Trigger)
Trigger Valve Assembly

QUICK RELEASE DOOR

ACCESSORIES AVAILABLE
-11-
FIG. 2