dji INSPIRE 2 Guide De L'utilisateur page 6

2. Connecting Batteries
Press the release button and open the corresponding charging port cover. Insert
the Intelligent Flight Battery into the charging port to begin charging. The battery
pair with more stored power will be charged first. The Charging Hub will intelligently
charge batteries in sequence according to battery power levels from high to low, if
batteries are not paired. Pairing can be carried out using the DJI GO 4 app. Refer to
the "Status LED Description" section for more information about Status LED blinking
patterns. The buzzer will begin beeping when charging is complete. Refer to the
"Buzzer Beeping Description" for more information about buzzer beeping patterns.
• Always align the grooves on the Intelligent Flight Battery with the battery
slot tracks.
• Press the release button to detach batteries after charging is complete.
• DO NOT leave metal terminals exposed to open air when not in use.
Status LED Descriptions
Status LED
Blinks Green
— Solid Green
Blinks Red
— Solid Red
Blinks Yellow
©
2016 DJI All Rights Reserved.
6
Description
Charging
Fully charged
Battery Charger error
Intelligent Flight Battery error
Battery temperature too high/low. Temperature
must be within operating range (5°-40℃)