Petrol Converters; Instructions To Order Spare Parts; Instructions To Request Warranties - Enarco AFE 2000 P Manuel D'instructions

The motor works but it overheats.............................................Clean the in and out of frame air vents
The motor works slowly and it overheats................................Verify the voltage of the electrical system
The converter makes excessive noise......................................Defective bearings

5.2 PETROL CONVERTERS

PROBLEM
The motor doesn´t work
en
The electric generator is
overheating
6

INSTRUCTIONS TO ORDER SPARE PARTS

6.1 INSTRUCTIONS TO ORDER SPARE PARTS
1.
LIST.We recommend to include ITEM´S MANUFACTURE NUMBER.
2.
motors' plastic frame. The transmission and pokers have the manufacture number engraved outside.
3.
consignee's complete name.
4.

6.2 INSTRUCTIONS TO REQUEST WARRANTIES

1.
with manufactures' defects. In no case the warranty will cover a malfunction due to improper usage of
the equipment. Labour and shipping fees will always be paid by the customer.
2.
AUTHORIZED SHOP, always including the complete address and name of the consignee.
12
AFG, AFD, AFE
1.- Check the gas level.
2.- Check the gas admission key is open.
3.- Check the choke postition .
1.- Clean the air ventilation (inlet and outlet).
2.- The connecting vibrating pokers exceed the converters
All spare parts request must include PART CODE NUMBER AS STATED IN THE PART
The identification plate with manufacture and model number is located in the top part of the
Let us to know the correct shipping instructions, including the wished route and the address and
Do not return the parts without authorization, the return are done freight prepaid.
The warranty is valid 1 year after the purchasing of the machine, The warranty will cover parts
In all warranty requests
Converter is broken down (motor or
generator)
The connecting vibrating pokers exceed
the converters capacity.
The converter might be working at two
phases
Check the cable specifications
Check the voltage in the voltage switch (if
apply)
The rotor might touching the stator
The frame is broken or has loose
CAUSES/SOLUTIONS
THE MACHINE MUST BE SENT TO ENARCO, S.A. or to an
FRECUENCY CONVERTERS