Bt Connection; Troubleshooting - Chal-tec 10033254 Mode D'emploi

BT CONNECTION

1. Turn on your BT device.
2. Power on the unit. If you have previously connected to another BT
device,the unit will reconnect.
3. Navigate to your BT device's setup screen, find "Moving-80.2" speaker"
and connect.
(Note: If your BT device prompts for a pairing code, enter "0000".)
4. To disconnect pairing while the BT icon is lit solid, press the mode
button.
5. To connect to another BT device, repeat step 3.

TROUBLESHOOTING

Problem
Distorted sound
Too much bass
High-pitched whistling nose
when using the microphone.
Solution
Try lowering the volume control
of your sound source, musical
instrument,
or microphone. Also, try to
reduce the overall volume of the
unit using the Master Volume
knob.
Try adjusting the tone or EQ
control on your sound source to
lower the bass
level. This will allow you to play
the music louder before clipping
distortion occurs.
This is probably feedback. Point
the microphone away from the
speaker.
EN
23