Calira Check-Panel 200 Mode D'emploi page 18

In order to switch off the display and the main switch relay in the fuse-junction
box or power supply (EVS), the main switch (5) must be kept pressed until the
symbol on the display disappears.
Setting the time, Activating/deactivating the button tone
The setup menu is called up by pressing the voltage inquiry button (4) for
approx. 5 seconds. The time can be set in this menu and the button tone
activated or deactivated.
16
17
18
Fig. 3: Setup menu
16 Time
17 Button function display, button tone ON/OFF
18 Button function display, setting the hour
19 Button function display, setting the minute
20 Button function display, end setup
By pressing button function display (2) marked "Button tone ON/OFF" (17),
the button tone can be activated or deactivated. The associated button function
display symbol (17) is then changed accordingly. When the button tone is
activated, a short "peep" is heard each time a button is pressed on the foil
keypad.
The hours in the time display can be set by pressing button (3) with the
function display "Set hour" (18).
The minutes of the time display can be set by pressing button (4) with the
function display "Set minutes" (19).
!
18
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
20
19
" # $