Kimex HM-SP102E Manuel De Montage page 4

FUNCTION:
Front Panel:
RS232 EDID
① ②
1.RS232 : Connect to a PC or Laptop via RS232 terminal to D-Sub 9-pin cable
for FW update.
2.EDID Control : EDID Control allows the integrator to choose the handshake
that will be provided to source devices of the system.
3.HDMI OUT2 LED : The LED will be illuminate when HDMI OUT2 connect to
HDMI sink.
4.HDMI IN LED : The LED will be illuminate when HDMI source detected.
5. HDMI OUT1 LED : The LED will be illuminate when HDMI OUT1 connect to
HDMI sink.
6. Switch ON/OFFControl the device power on and power off.
CONNECT DIAGRAM:
Output1
5V/DC
HD TV
ON/OFF
Output2 Input Output1
③ ④ ⑤ ⑥
DVD
Input Output2
HD TV
Rear Panel:
5V/DC
①
1.DC 5V : Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet.
2.HDMI OUT1 : Connects to HDMI sink equipment such as a display.
3.HDMI IN : Connects to HDMI source equipment such as a DVD or Blu-ray
player.
4.HDMI OUT2：Connects to HDMI sink equipment such as a display.
5
RS232 CONTROLLER :
RS-232:
1. Connect PC to device by USB to RS232 tool
2. Open "EPConsle" and click "Start" button
7
Output1 Input
② ③
Output2
④
6
8