Philips DECT 121 Mode D'emploi page 29

Connect
Connect USB device
1 Connect the supplied USB cable on the back of the adapter and
on your PC USB port
When you connect the VOIP021 USB
adapter, hardware recognition is started
2 Follow the hardware recognition instructions
Confirm the preset options with < Back or
Next >
WARNING
during installation informing you about a
missing Windows Logo test, click on
Continue Anyway to continue the
installation
3 Click on Finish
> Red icon in the status bar
Enter your serial number and your personal
information
1 Double-click on the IP phone center icon on desktop
2 Find serial number printed on CD Rom sleeve
3 Enter your mandatory personal data : first name, last name,
email address, country.
These datas are written in the VOIP adapter.
In case of reinstallation, you must enter the
datas again.
If dialog boxes appear
EN
11