Dantherm HPP-i Série Manuel D'installation page 113

Create Family
Please set family name and choose the room of device.
c� Familie anlegen
APP Pairing
Please make sure you are connected to the Wi-Fi.
1.Press " " for 3 seconds to unlock the screen, press "
then release, a�er hearing the "Beep",enter Wi-Fi code. During connec�on,
" " flashes. When the APP connects to the Wi-Fi successfully, the "
d� APP-Kopplung
light will come on.
1007332 AUSGABE 5
3
Create Family
Add Family
Enter Family name
Please set family name and choose the room of device.
Set location
You can change room seettings anytime.
4
APP Pairing
Please make sure you are connected to the Wi-Fi.
1.Press " " for 3 seconds to unlock the screen, press "
then release, a�er hearing the "Beep",enter Wi-Fi code. During connec�on,
" " flashes. When the APP connects to the Wi-Fi successfully, the "
light will come on.
Add Family
Enter Family name
Set location
You can change room seettings anytime.
" for 3 seconds
"
Bitte stellen Sie sicher,
dass Sie mit dem WLAN verbunden sind�
1. „ " drei Sekunden lang drücken, um den Bildschirm
zu entsperren.
2. „ " drei Sekunden lang drücken, dann loslassen,
und nach dem Signalton den WLAN-Code eingeben.
Während des Verbindungsaufbaus blinkt „
Wenn die APP erfolgreich mit dem WLAN verbunden ist,
leuchtet „ " kontinuierlich.
" for 3 seconds
"
".
25