Troubleshooting - Hydro-Pro+ INVERBOOST+ Tec 7018545 Notice D'installation Et D'utilisation

Symbol of heating, the light will be on when it is in operation.
When defrosting, the light will flash.
6.2.6
Symbol of cooling, the light will be on when it is in operation.
6.2.7
Symbol of automatic stop, the light will be on when it is in operation.
6.2.8
Symbol of automatic start, the light will be on when it is in operation.
6.2.9
Press this button, the light will be flash,
6.2.10
While you choose the Smart, the heat pump will just operate in 'Medium output' and 'Full output'
When in 'Medium output', the light of Smart will flash.
When in 'Full output', the lamp of Smart is lighting, the lamp of Powerful will be flash.
6.2.11
While you choose the Silent , the heat pump will just operate in 'Medium output' and 'Small output'
When in 'Small output', the light of Silent will flash.
When in 'Medium output', the lamp of Silent is lighting, the lamp of Smart will be flash.

7. Troubleshooting

7.1 Error code display on LED wire controller
Malfunction
Inlet water temperature sensor
failure
Outlet water temperature sensor
failure
Heating condenser sensor failure
Gas return sensor failure
Ambient temperature sensor
failure
the heat pump will operate in 'Full output' only.
Error code
PP01 The sensor in open or short
circuit
PP02 The sensor in open or short
circuit
PP03 The sensor in open or short
circuit
PP04 The sensor in open or short
circuit
PP05 The sensor in open or short
circuit
- 24 -
Reason
Check or change the sensor
Check or change the sensor
Check or change the sensor
Check or change the sensor
Check or change the sensor
.
Solution